
Instructions:
To Make the Earrings:
Using the 0.8mm wire cut a section around 10 cm long / turn a loop in one end with round nose pliers / use a nail file or cup bur to file the other end smooth / Around 5mm from the loop bend the wire around 45 degrees to the left / taking a pen, or jump ring maker wrap the remainder of the wire around until you have something that resembles a classic fish hook earring / Bend the last 5mm at a 30 degree angle away from the earring loop. If the wire is too long, cut and refile to the correct size / Hammer the earring gently to give it more strength.
To Make the Leaves:
Cut a number of 1.5mm wire pieces around 8-10cm long / turn a loop at tone end using round nose pliers / Hammer the other end until flat. It's quite easy to get a nice gradient. Just take your time and don't go too crazy with the hammer! / Attach the leaves to the earrings using jump rings-more information on jump rings here
Great tutorial! I always love simple diy earrings! :)
ReplyDeleteThank you Maria!
DeleteThese are so pretty. Great job
ReplyDeleteThanks x
DeleteLove your tutorial! Great DIY and beautiful idea!
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteWow! Love your blog and your ideas. You're so creative!
ReplyDeletehttp://www.welliestyle.com/